Mouse

OPTION MOUSE CLKpin, DATApin

non USB firmware only

Set the pins to be used to connect a PS2 mouse.

Using this command the mouse is automatically configured on boot and you can set up interrupts and read values with no additional commands. This is different from the MOUSE OPEN which only connects to a mouse while the program is running. The PS2 mouse must be is disabled.

OPTION MOUSE DISABLE

Disables the automatic connection to a PS2 mouse and frees up the pins for normal usage.

OPTION NOCHECK ON/OFF

This command, when set ON, disables the standard checking for interrupts and ctrl-C at the end of every command. Setting it to ON allows time critical processing to take place without risk of interruption.

However, the command should be used carefully or the program may only be stopped with a H/W reset.